Equipment

Cable / Harness Testing

Cirris 1100H+ Hipot Tester

  • Voltage: 1500VDC, 1000VAC
  • Points: 128
  • Connection Resistance Range: 0.1 ohms-1M ohms
  • Insulation Resistance Range: 0.1 ohms-1000M ohms
  • Components: Resistors, Capacitors, Diodes, Twisted Pairs
  • Adapters: Paramount produce our own interfaces to ensure the most effective solution for connecting your cable or harness
cirris 1100H

Cirris 1000R+ Tester

  • Voltage: 5VDC
  • Points: 128
  • Connection Resistance Range: 0.1 ohms-10K ohms
  • Insulation Resistance Range: 100K ohms-5M ohms
  • Components: Resistors, Diodes, Twisted Pairs
  • Adapters: Paramount produce our own interfaces to ensure the most effective solution for connecting your cable or harness
cirris 1000R+

Pull-off force Crimp Testing

 

pull test

Hand Crimping Tools

Paramount has a large range of crimp tools. We are sure to have the right tool for your assembly.

jstkleinlogo gb molex_logo gb
SouriauLogo gb
HARTING_Logo GB1
logo-tyco-amp Logo_Hirschmann_GB
dmc_logo
FCI_Logo
logo_ITT
amphenol_logo gb
ThomasBetts_logo
cembrelogo
crimp tools cut
crimp tools cut2

In addtion to manufacturers’ tools Paramount also have a full range of generic tools for crimping

insulated terminals copper tube terminals
ferrules
uninsulated terminals idc
Coaxial_Cable_RF_Connector
  • Bootlace Ferrules
  • Insulated Terminals
  • Copper Tube Terminals
  • Uninsulated Terminals
  • RF/ Coax
  • IDC

Crimp tools are regularly maintained and calibrated to ensure the perfect connection every time.

Automated Wire Processing

Komax Kappa 230

The Kappa 230 automatic cut and strip machine for wire up to 16mm˛ and multi-core cables, with a quick job changeover.

Stripbox

  • The Stripbox strips stranded wires up to 2.5mm2  
  • With Teflon, PTFE, PVC or similar insulation material.

 

wire cut & strip
stripbox

PCB ASSEMBLY

CMS400 WAVE SOLDERING MACHINE

The latest Lead Free compatible wave-soldering machine, Using Nihon Superior Co. Ltd SN100Csolder. Paramount uses a continuous finger conveyor with motorised width adjustment, allowing the full flexibility required for prototype runs through to full batch quantities.

No matter whether you need 1 or 1000 boards Paramount can wave solder your assembly

Find out more about the lead-free solder used by Paramount

Cropmatic

To complement the flow soldering machine Paramount have a cropmatic, to ensure that all component leads are cut to the same length. By using 1.2mm crop plates as standard Paramount exceed the IPC-A-610 Class 3 requirement of a maximum1.5mm lead protrusion.

 

cms400

 © 2010 Paramount Electronics Ltd